This site uses cookies. By continuing to use this site you are agreeing to our use of cookies.

CWI Series

The CWI is a space-saving convector that provides the quietness of natural convection heating. With its contemporary look, the CWI perfectly blends with any surrounding.

Standard Construction Features

Heating Elements

2 Stainless steel elements with aluminum fins float on high temperature nylon bushings for quiet
operation.

Outlet Grille

The CWI has a 20-gauge steel grille with rounded corners and a polyester powder paint finish available in
standard white. The warm air outlet will direct the air to the center of the room.

Built-in Controls

Automatic reset thermal cutout and over temperature warning light (units under 250V). Heaters can be
controlled by a remote thermostat (not included) or with optional (T8) built-in non-programmable electronic thermostat.

Installation Requirements

The minimum installation clearance is four inches to the floor and from an adjacent wall. Installing
is made easy with the included wall mounting bracket. This heater is approved for residential use in the United States.

Factory Built-in Options

  • Triac Proportional Relay
  • Triac Proportional Relay with transformer
  • Built-in Non Programmable Electronic Thermostat

Field-Installed Options

Shipped loose for field installation into heater.

  • TRIAC Proportional Relay
  • TRIAC Proportional Relay with transformer

 

secret