WLI Series Wall Heater
The WCI fan-forced wall heater is designed for commercial and industrial areas requiring higher KW ratings and quick recovery. The unit provides a burst of heat in areas affected by cold drafts or wide temperature swings.
- Mounting Options: Units can be surface (with optional box) or recessed mounted, vertically or horizontally, in one of four positions. A tapered recess box assures a tight fit when mounted into the wall.
Approvals
Standard Features
Heating Elements
Steel finned tubular elements.
Outlet Grille
The louvered front grille is made from 22-gauge steel with rounded corners. The grille is finished with an epoxy/polyester powder paint in white or almond.
Built-in Controls
Automatic reset thermal cutout.
Fan Motor
Quiet, permanently lubricated axial fan operates at 38 dBA at 40 CFM for models up to 1000 W and 41.3 dBA at 80 CFM for all models rated above 1000 W.
Installation Requirements
The air outlet should be installed a minimum of ten inches above floors.
Rough In Dimensions
All heaters: 7-3/16″ wide x 14-1/8″ high x 3″ deep.
Factory Built-in Options
- Disconnect Switch, Double-pole
- Thermostat
- Single-pole
- Double-pole
- Tamperproof
- Off position
Field-Installed Options
Shipped loose for field installation into heater.
- Surface Mounting Box
- Thermostat Kit
- Adjustable
- Tamperproof
- Single-pole
- Double-pole
Thermostat
Remote Wall Mount Thermostat Available
- Line Voltage
Applications
Breezeways
Entryways
Restrooms
Small Offices
Storage Rooms
