This site uses cookies. By continuing to use this site you are agreeing to our use of cookies.

CLI Series Fan-Forced Ceiling Heater

The CLI ceiling heater is designed for recessed mounting into a ceiling. It provides heat in a quiet, efficient manner. Single units can heat small areas and multiple heaters can be used in large or odd-shaped rooms.

  • Mounting Options: Units can be surface (with optional box) or recessed mounted. A tapered recess box assures a tight fit when mounted into the wall.

Standard Construction Features


The cabinet is 20-gauge steel with a V-shaped recessed box.

Outlet Grille

The louvered front grille is made from 22-gauge steel with rounded corners. The grille is finished with an epoxy/ polyester powder paint in white or almond. Optional colors: metallic silver, bronze, metallic charcoal, aluminum, and semigloss.

Built-in Controls

Automatic reset thermal cutout.

Fan Motor

Quiet, permanently lubricated axial fan operates at 38 dBA at 40 CFM for models up to 1,000 W and 41.3 dBA at 80 CFM for all models rated above 1,000 W.

Installation Requirements

The air outlet should be installed a minimum of ten inches from the wall and should be oriented towards the center of the room.


Room temperature is controlled by a remote wall mounted thermostat which is sold separately.

Rough In Dimensions

All heaters: 7-3/16" wide x 14-1/8" high x 3" deep.

Factory Built-in Options

  • Disconnect Switch, Double-pole
  • Factory Sealed Elements for high humidity

Field-Installed Options

Shipped loose for field installation into heater.

  • Surface Mounting Box
  • Remote Wall Mounted Thermostat
    • Line Voltage