This site uses cookies. By continuing to use this site you are agreeing to our use of cookies.

WLI Series Wall Heater

The WCI fan-forced wall heater is designed for commercial and industrial areas requiring higher KW ratings and quick recovery. The unit provides a burst of heat in areas affected by cold drafts or wide temperature swings.

  • Mounting Options: Units can be surface (with optional box) or recessed mounted, vertically or horizontally, in one of four positions. A tapered recess box assures a tight fit when mounted into the wall.

Standard Construction Features

Heating Elements

Steel finned tubular elements.

Outlet Grille

The louvered front grille is made from 22-gauge steel with rounded corners. The grille is finished with an epoxy/polyester powder paint in white or almond.

Built-in Controls

Automatic reset thermal cutout.

Fan Motor

Quiet, permanently lubricated axial fan operates at 38 dBA at 40 CFM for models up to 1000 W and 41.3 dBA at 80 CFM for all models rated above 1000 W.

Installation Requirements

The air outlet should be installed a minimum of ten inches above floors.

Rough In Dimensions

All heaters: 7-3/16" wide x 14-1/8" high x 3" deep.

Factory Built-in Options

  • Disconnect Switch, Double-pole
  • Thermostat
    • Single-pole
    • Double-pole
    • Tamperproof
    • Off position

Field-Installed Options

Shipped loose for field installation into heater.

  • Surface Mounting Box
  • Thermostat Kit
    • Adjustable
    • Tamperproof
    • Single-pole
    • Double-pole


Remote Wall Mount Thermostat Available

  • Line Voltage