-
310 Series Thermistor Sensors
The 310 series thermistor sensors must be wired in series with a 320 series setpoint adjuster. The total resistance is 2200 ohms when the sensor temperature equals the setpoint. The NTC thermistor increases resistance as temperature decreases.
-
320 Series Setpoint Adjusters
The 320 series Setpoint Adjuster must be wired in series with a 310 Series Thermistor sensor. The total resistance is 2200 ohms when the sensor temperature equals the setpoint. The 205-S10 Series step controller uses a version of the 320 Series Setpoint Adjuster.
-
A Series and B Series Power Controllers (Series 101, 102, 103, & 108 )
Series 101, 102, 103, & 108 available as Model A & B power controllers are solid state, zero-cross fired, proportional devices. Line voltage is switched 0 – 100% linearly, with respect to the input range, and a 1 second time-base controls power to the load. Current ratings up to 50 amps and various configurations available for indoor and outdoor construction.
-
M & S Series Power Controllers
Model M & S Series power controllers are solid-state, zero-cross fired, proportional devices. Line voltage is switched 0-100% linearly, with respect to the input range, and a 4 second time-base controls power to the load. Capable of pairing with Indeeco sequencers for full vernier control, Type 4X construction when properly optioned, and rated up to 70 amps for diverse applications.
-
S10 Series Step Control
Indeeco S10 series step controller does more to provide precision control for multi-stage applications.
-
S5 Series Step Control
Indeeco’s S5 Series step controller provides low cost precision control for multi-stage applications.
