Products

Infrared (IR) technology is currently used in a wide range of industrial applications such as:

  • The electronics industry for drying solder resists
  • Food processing for browning and sterilization
  • Coating/finishing for drying and curing
  • Textiles for drying and sealing
  • Plastics for softening
  • Printing for drying
  • Manufacturing/engineering for degreasing, preheating, and shrink fitting

Infrared energy causes the surface electrons of an object to excite and oscillate, creating heat. Several factors determine the temperature, not the least of which being the wavelength of the electromagnetic radiation generated by the infrared heating source. The equipment used for the above applications utilizes medium and long wavelength IR and is typically capable of less than 800°F (427°C). Since the wavelength is inversely proportional to the temperature, the wavelength shortens as the temperature goes up [2].

The high temperature infrared processing discussed here primarily utilizes short wavelength T-3 tungsten-halogen lamp-based systems with unique designs to enable the systems to operate at higher temperatures in industrial environments. Infrared heating has many advantages over other heating techniques. It provides:

  • An inherently clean non-contact heating method
  • Rapid response energy fluxes capable of heating rates in excess of 50°C/s (material and mass dependent)
  • Excellent spatial and tempered control allowing sample-only heating uni-directionally over large areas
  • Rapid power level changes due to low thermal mass (halogen lamps)
  • Rapid cooling rates due to the “cold wall” nature of IR
  • Controllable temperature gradient processing up to flux densities of 50 W/cm2

Thus, infrared provides a versatile and flexible answer to heat transfer problems throughout the industrial spectrum [3].

Read more here.

For more information: The Infrared Division of IHEA (IRED) recently published a handbook that explains the benefits of infrared for industrial applications.

SPECIAL FOCUS: Infrared Heating Infrared HEATS UP

SPECIAL FOCUS: Infrared Heating Infrared HEATS UP

Infrared (IR) technology is currently used in a wide range of industrial applications such as: The electronics industry for drying solder resists Food processing for browning and sterilization Coating/finishing for drying and curing Textiles for drying and sealing Plastics for softening Printing for drying Manufacturing/engineering for degreasing, preheating, and shrink fitting Infrared energy causes the…

Comparing Heat Sources

Comparing Heat Sources

When comparing heat sources used for drying processes there are a few variables: the primary carriers are usually solid or gaseous but may take the form of waves or other radio frequency technologies. Fossil fuels constitute the majority of commercially available energy sources used to generate heat. The supply of these fuels is diminishing, however,…

Electric Heating Elements

Electric Heating Elements

Electric heating elements in the form of coil, ribbon or rod (Fig. 1) made from alloys such as nickel-chromium, iron-chromium-aluminum and refractory metals are widely used throughout the heat-treating industry. They are found in both low- and high-temperature furnaces and perform well in cyclic-duty service. Let’s learn more. The temperature of a heating element and…

Short-Wave Infrared Speeds Up Aerospace Tool Heating

Short-Wave Infrared Speeds Up Aerospace Tool Heating

This article discusses two different ways that infrared (IR) heating can be used. One is a high-heat process requiring preheating of the tools/dies, and the other is a lower-temperature process where IR is cleaner and more efficient. Can infrared be used in your process to improve energy efficiency? Short-wave infrared emitters have allowed Mettis Aerospace…

UPI Portable Unit Heater

UPI Portable Unit Heater

The UPI portable unit heater provides clean, odorless backup heat in indoor work areas. Rugged enough to provide temporary heat at construction sites, this portable unit is well suited for commercial heating applications. Standard Construction Features Heating Elements – Stainless steel tubular elements provide durability. Housing – Heavy 22-gauge galvanized steel cabinet has a polyester powder paint…

Unit Heater COMPACT

Unit Heater COMPACT

When there is limited space or with the need of a low cost explosion-proof unit heater, Indeeco’s COMPACT is the right fit! This heater is designed with both size and economy in mind. Check out the safety features this great heater can provide! There are many advantages and unique features that the COMPACT offers: Compact…

Need a quote?

We market our products through a nationwide network of representatives. Contact us today!

Scroll to Top