-
AS Series Radiant Ceiling Panels
AS Series radiant panels are ideal for offsetting heat loss through exterior glass on the perimeter of a building. They help to control the problem of condensation typically found with these large exterior glass walls. Radiant panels provide improved comfort by maintaining an even temperature from floor to ceiling.
-
909/911 Series Commercial Steel Sill-Height Convector
The 909 series is listed for wall mounted applications, while the 911 series is listed for pedestal mounting and comes standard with pedestal kits for mounting and in-field adjustment.
-
903 Series General Compact Baseboard Heater
The 903 Series baseboard heater is more compact than any other heater on the market, yet it provides a high level of performance and strength. The unit’s trim design enhances its appearance and rounded corners eliminate the sharp edges found on square heaters.
-
906 Series Architectural Aluminum Sill-Height Flat Top Convector
The 906 Series are designed to fit under large windows to prevent cold down drafts. These heaters can provide total or supplemental heating for a variety of applications.
-
908 Series Commercial Steel Slope-Top Convector
Furnish and install, where indicated on plans, 908I Series Commercial Steel Slope-Top Convector type heaters, suitable for continuous operation, as manufactured by Indeeco®.
-
916 Series Architectural Aluminum High Watt Density Draft Barrier
The 916 Series Architectural Aluminum High Watt Density Draft Barrier heaters are designed to fit under large windows to prevent cold down drafts. The heater provides total or supplemental heating for a variety of applications.
-
905/907 Series Industrial Steel Sill-Height Convector
The 905/907 Series are designed to fit under large windows to prevent cold down drafts. The heaters are ideal for heavy traffic areas with high heating requirements.
-
914 Series Mini Architectural Aluminum Draft Barrier
The 914 Series heaters are designed to fit under large windows to prevent cold down drafts. The heater provides total or supplemental heating for a variety of applications.
-
912/913 Commercial Steel High Watt Density Sill-Height Convector
The 912/913 convectors are designed to heat large commercial spaces. They provide large amounts of heat without the fan noise associated with unit heaters.
-
CCI (931) Series
The heating equipment shall include a ceiling mounted 931I electric automatic fan-forced heater suitable for large area heating as manufactured by Indeeco®. The heater shall be designed for ceiling surface, recess or T-Bar mounting. Heaters shall be cETLus Listed.
-
CDI (937) Series
The heating equipment shall include an electric, ceiling-mounted type 937 Series fan-forced air heater suitable for large area heating as manufactured by Indeeco®.
-
CLI (941) Series
The heating equipment shall include an electric automatic 941I Series fan-forced air heater suitable for small area heating as manufactured by Indeeco®. Heaters shall be cETLus Listed. The heater shall be designed for surface or recessed ceiling mounting. For surface mounting, an Indeeco FIF-ASM surface mounting frame shall be used.
-
Compact Explosion-proof Unit Heater
Indeeco’s Compact explosion-proof unit heater is designed with both size and economy in mind. The COMPACT design offers the most economical solution for heating small Class I, Group D hazardous areas. It is a cost effective alternative to the use of explosion-proof convection heaters.
-
CUI (922) Series
The electric cabinet unit heaters shall be as manufactured by Indeeco®. Heaters shall be UL/cUL Listed, designed for mounting in any position, including on-end, fully recessed, semi-recessed or surface mounted. All capacities, voltages, physical sizes should be as specified in the heater schedule. All three phase heaters shall have a balanced heating load. Control voltage is to be internally generated by 24 VAC (Optional 120 VAC).
-
WCZ (950) Series
The heating equipment shall include an electric automatic fan forced air heater suitable for small area heating, as manufactured by Indeeco®. The heater shall be designed for wall mounting, recess or surface. Heaters shall be cETLus listed.
-
Custom Duct Heaters
For more than 55 years, Indeeco has been supplying special heaters for use in air handling and air conditioning equipment. A wide range of special construction techniques has been developed to insure proper operation as well as easy installation, either in the OEM’s plant or in the field.
-
Custom Explosion-proof Duct Heaters
Wider range of sizes than available in the other two designs, Vertical airflow, Ratings up to 750 KW, 600 volts
-
Explosion-proof Convector
Indeeco’s explosion-proof convector is designed to provide a heavy duty and corrosion resistant heat source.
-
FFI (939) Series
For ground level comfort, choose a drop-in unit heater. These units are specifically designed to be placed into flooring for an unobtrusive heating solution that keeps building occupants warm without taking up extra space.
-
Invizatherm™
Whether you have a warehouse, dock, or workshop to keep heated, Invizatherm™ is the smart choice. Let the quartz era end and a revolution begin with a zero maintenance heater. You’ll never worry about bulbs to replace or reflectors to clean.
-
Invizatherm™ Thin Series
Invizatherm™ Thin Series includes all of the features and benefits of the Invizatherm™, in a new, slimmer, modern design. Packed with more heat per square inch, the Invizatherm™Thin Series is perfect for all of your heating needs.
-
IUH Series Industrial Unit Heater
Indeeco’s industrial unit heater is designed for maximum heating performance in non-hazardous and non-corrosive environments.
-
QUA & QUZ Standard Open Coil Duct Heaters
Indeeco has developed QUA and QUZ heater lines to satisfy most typical space heating requirements, simplifying specification, ordering and delivery. Both standard and quick ship delivery programs are available for the full line of QUA and QUZ heaters. QUA and QUZ heaters are available up to 456 KW
-
RCI (918) Series
918 Series are designed to supply efficient radiant heat. They provide greater comfort at lower temperature settings and can be set up for individual or zone control to reduce energy costs.
-
Series EP2 Explosion-proof Duct Heaters
cCSAus Approved for Class I, Division 2 locations where a hazardous gas is occasionally present, Ignition temperatures as low as 392°F (200°C), For ducts up to 240” (610 cm) wide by 120” (305 cm) high, Ratings up to 1000 KW, 600 volts
-
Triad® Washdown & Corrosion Resistant Unit Heater
The Indeeco Triad unit heater is the perfect solution to the problem of heating people or equipment in non-hazardous environments where moisture and corrosion exist.
-
TSI (938) Series
This electric toe kick heater installs under cabinets in kitchens, bathrooms, stairwells and more — providing floor-level warmth whenever you need it. Get quiet, even heat in a slim design that saves wall and floor space.
-
UCI Series Unit Heater
The UCI unit heater is designed for industrial and commercial applications with ratings up to 60 KW at 2,000 CFM.
-
UHCI Series 50 Hz
The UHCI commercial unit heater was developed to target the international commercial and institutional markets. This unit heater offers popular control options and a rugged construction suitable for commercial applications. A draw-through design with an egg-crate discharge air diffuser and individual adjustable louvers provide excellent performance.
-
UHHP Series
Designed for use as a furnace or lower heater in a horizontal orientation only. Available in a wide range of wattages from 3kW to 50kW.
-
UHIR Series Unit Heater
The UHIR unit heater is available in 50 standard models with ratings up to 50 KW at voltages of 208, 240, 277, and 480 single or three-phase. They are available with a wide variety of factory built-in or field-installed options.
-
UHLP Series
Low profile style plenum heaters are the perfect choice for low clearance applications in ceilings and floors. Available in wattages from 5kW to 18kW.
-
UHP Series
Confined space plenum unit heater is the perfect heating solution for parking garages and confined spaces requiring wattages up to 5kW.
-
925 Series
The 925 series unit heater is an economical choice for commercial heating applications and is ideal for primary or spot heating applications. Units can be wall or ceiling-mounted for horizontal airflow.
-
Ultra-Safe™ EXP Explosion-proof Unit Heater
Our most popular and versatile construction has a broad range of stock designs, special options and the industry’s lowest Ignition Temperature Code rating, 320°F (160°C).
-
Ultra-Safe™ Explosion-proof Duct Heaters
cCSAus Approved for virtually all Class I and Class II, Division 1 and 2 hazardous gas or dusty atmospheres, Ignition temperatures as low as 320°F (160°C) ,Six standard sizes to fit a wide range of ducts, Ratings up to 240 KW, 600 volts
-
WAI (933) Series
The heating equipment shall include electric, automatic fan forced air heater suitable for large area heating, as manufactured by Indeeco® . The heater shall be designed for wall recess or surface mounting. Heaters shall be cULus or equivalent cETLus.
-
WCI (932) Series
The heating equipment shall include an electric automatic fan forced air heater suitable for small area heating, as manufactured by Indeeco®. The heater shall be designed for wall mounting, recess or surface. Heaters shall be cETLus listed.
-
WLI (934) Series
The heating equipment shall include an electric automatic fan forced heater suitable for small area heating, as manufactured by Indeeco®. The heater shall be designed for wall mounting, recess or surface. Heaters shall be cETLus listed.
-
WRI (930) Series
The heating equipment shall include an electric automatic fan forced air heater suitable for small area heating, as manufactured by Indeeco®. The heater shall be designed for wall mounting, recess or surface. Heaters shall be cETLus listed.
